- 16182 Gothard Street, UNIT M Huntington Beach California
10 x Tubes Sikaflex P2G Adhesive
$89.00
10 x Tubes Sikaflex P2G Adhesive
Includes:
10 x 330 ml Tubes Sika Flex P2G
8 x Application Nozzle’s
NO PRIMER INCLUDED
Spec:
330 ML Tube
Cartridge Style
Applied through standard caulking gun
Primer-less to Glass, Please use primer on body of the vehicle (primer not included)
More spec and product data and safety info available on the Sika Flex website here:
How To Use:
Sika Flex P2G is supplied in a 330 ml cartridge. It is applied through a silicone gun. Sika Flex P2G is used by professional’s to bond glass to vehicles. By its nature Sika Flex P2G has a high viscosity meaning its recommended to use a professional 18 to 1 silicone gun for application.
A standard silicone gun be used but it will be hard for the adhesive to be forced from the tube. To make this easier Sika Flex P2G can be heated to make the adhesive easier to apply you can use a heat gun for this. A gentle heating is required
Surface Preparation:
Primer must be used on the body of the vehicle, P2G can be used without primer to the glass but we would still recommend using it.
Surfaces must be clean, sound, dry and free from all traces of traditional and non-traditional contamination. All corrosion must be removed and all bare metal scrapes and scratches must be prepared in accordance with Sika’s Corrosion Treatment recommendations. For preparation of all bonding surfaces it is required to read and understand the instructions given in the Sika AGR Technician Training Manual. Windshields without ceramic coating need proper UV protection.
Application:
It is recommended to apply the adhesive with a piston-type application gun. To ensure a uniform thickness of adhesive bead, we recommend that the adhesive be applied in the form of a triangular bead
Use gloves and eye protection
Do Not Eat
Application Limits:
Avoid contact with alcohol and alcohol containing solvents during cure.
Do not apply over silicones or in the presence of curing silicones.
Glass parts must always be installed within the open time. The open time is significantly shorter in hot and humid climates. Never install any glass part after the product has built a skin.
Bonding glass to vehicles forms part of the structural integrity and as such must be done to the manufacture specs.
Van Tek Glass accepts no responsibility for your fitting. If in any doubt get a professional in to do the job for you
Safety Info:
Window Bonding Kit’s brought to you by Van Tek Glass – Huntington Beach
