1 x Tube Window Bonding Kit

1 x Tube Window Bonding Kit

Used to bond glass into vehicles.

This is a 1 x Tube kit. Depending on how much is applied is generally enough adhesive to bond fit one small window, Sprinter, ProMaster, Transit side windows would require 2 x tubes.

• 1 x Sika Flex P2G Urethane Adhesive Tubes (applied through standard silicone gun)
• 1 x Nozzle tip to apply the adhesive
• 1 x Primer Stick with applicator (to be applied to the window and body panel before applying adhesive)
• 1 x Glass Wipe/Panel Wipe (to clean the window and body panel before applying primer)
• 1 x Bonding Kit Instruction Manual

The only other thing you may need in addition to the bonding kit is a U trim. It’s a u shaped piece of rubber used to cover the cut edge and the inner lip, it’s available separately as you don’t always need it – If your carpet lining for example the carpet folds over the cut edge.

U trim available here: https://vantekglass.com/product-category/window-bonding-kits-and-accessories/

If you need a U trim hit the back button and jump into the fitting kit category.

How to use our bonding kit here:

1 x window bonding kit brought to you by Van Tek

**Disclaimer**

Van Tek Glass accept no responsibility for the installation process or installation cost’s. Please don’t start the installation process before your windows have arrived and you have made sure they are the correct windows for your vehicle.

The buyer is 100% responsible for the installation process including any products used in the fitting process purchased from us or purchased elsewhere. This includes the inability to fit either yourself or via a trained professional.

Always use precaution during the fitting process, Wear gloves/protective clothing and eye protection. Its your responsibility to follow the manufacturer process for window bonding. The correct procedure must be followed to achieve a structural bond

More info and safety info and product data sheets can be found on sika.com